ENGLISH

Developing a landscape of quality parameters and measurement methods for Lithium-ion battery cell manufacturing process - Niramai Bunniam

sp_imageText



Target of the project:
- To identify critical quality parameters which are correlated to important battery parameters in electric vehicles (EVs).
- To define and assess potential measurement methods and equipment for those critical quality parameters, in order
to build up quality landscape and analyse white spots.


Which kind of project?  Masterthesis
Graduation Date January 2021
Where?

Fraunhofer IPT - Forschungsfertigung Batteriezelle

Supervisor Dr. Saskia Wessels, Prof. Dr. Mertins

Fabrication and characterization of hydrophobic coatings on metallic membranes for the gas/liquid phase separation at high temperatures - Khurram Muhammad

sp_imageText

 

Process intensification in micro-structured devices can be achieved e.g. employing continuous removal of steam in a polycondensation reaction at 220 °C. The novel membrane technology is used for the continuous removal of steam during the reaction. The water should be separated in the gaseous state through the pores. Many of the common materials used for membrane separation like polymeric and ceramics materials with low thermal stability and brittleness respectively. Metallic membranes are durable and thermally stable but hydrophilic.

Which kind of project?  Masterthesis
Graduation Date 2021
Where?

Karlsruhe Institute of Technology - KIT

Supervisor Prof. Dr. Mertins, Dipl.-Ing. Sara Claramunt

Conduction mechanism in thin films of lead zirconate titanate Pb(Zr,Ti)O3 (PZT) materials - Shashank Tiwari

sp_imageText

 

Target of your Thesis:
To develop deeper understanding, knowledge, capabilities, and problem-solving attitude in the context of the microelectromechanical systems MEMS devices.

Which kind of project?  Masterthesis
Graduation Date 2021
Where?

Robert Bosch GmbH

Supervisor Prof. Dr. Mertins, Dr. Daniel Monteiro Diniz Reis

ELECTROCHEMICAL ENERGY STORAGE SYSTEMS: Technical Review and Market Analyze - Abdullah Türkay

sp_imageText

 

Target of your Thesis:
Technical review of different electrochemical energy storage systems and analyzing the market driving forces and limiting factors of these systems.

Which kind of project?  Masterthesis
Graduation Date 2021
Supervisor Prof. Dr. Mertins, Prof. Dr. Striewe

Isabeau Zahm - Production of new adsorbent materials for usage in the field of air filtration

  

The work covers the development of new adsorbent materials for use in the air filtration sector. The work mainly covers the field of literature research and, based on this, the development of an own material. Various parameters of the material and the manufacturing method are systematically varied in order to obtain the best possible filtration effect and stability of the material. The production of the material takes place in the chemistry laboratory.

Which kind of project?  Student Trainee
Graduation Date October 2020 - December 2021
Where?

Hengst SE. (Münster)

Raphael Beil B.Sc. - part time work as lab scientist at FH Münster

sp_imageText

Development of a new type of sealing
During my time working at the University in part time while doing my studies in Materials Science & Engineering I mainly took part in one of the projects of the Center of Sealing Technologies. In this project the goal is the development of a new type of PTFE-sealing together with an industrial partner. In doing this my responsibility mainly was the analysis of material properties and structures. This happened in close collaboration with other laboratories of the physics and chemistry department. Most of the analysis was the examination with the help of electron microscopy but also analysis of thermal and optical properties via scanning calorimetry and infrared spectroscopy.

Which kind of project?  Part time work as lab scientist
Date - Duration From February 2021 on
Where?

University of Applied Science Münster Center of Sealing Technologies, Electron microscopy Lab

Supervisor Prof. Dr. Riedl, Prof. Dr. Mertins
Um unsere Webseite für Sie optimal zu gestalten und fortlaufend verbessern zu können, verwenden wir Cookies. Weitere Informationen und die Möglichkeit zum Widerruf finden Sie in unserer Datenschutzerklärung.
Seite drucken